Imagine heating a home with energy drawn from beneath its foundations: not by burning gas, and not by relying on the temperature of the outside air, but by tapping into the relatively steady warmth stored in the ground. The idea sounds almost futuristic. In reality, ground-source heat pumps have been used for decades, while deeper geothermal projects are beginning to attract renewed attention as countries look for reliable, low-carbon ways to heat buildings.
- What do we mean by geothermal heating?
- How a ground-source heat pump heats a building
- Why the technology is attracting attention
- The UK opportunity: more than hot springs
- Where could geothermal make the most sense?
- The advantages — and the catch
- Could it outperform air-source heat pumps?
- What needs to happen next?
- Verdict: a sensible part of the future, not a universal answer
- Sources and further reading
Could geothermal energy become a sensible way to heat homes, offices, schools and hospitals? The answer is yes — but with an important qualification. The most practical opportunity for widespread building heating is not necessarily the dramatic image of drilling kilometres into the Earth’s crust. It is a combination of shallow ground-source heat pumps, carefully selected deep geothermal projects and shared heat networks. Each has a different role, cost and set of limitations.
What do we mean by geothermal heating?
Geothermal heating is an umbrella term covering several technologies. Confusion arises because they are often discussed as though they are the same thing.
Shallow geothermal heating uses the relatively stable temperatures found in soil, rock or groundwater near the surface. In the UK, the British Geological Survey describes shallow geothermal resources as generally low-grade heat, commonly around 10–25°C, stored at depths of up to 500 metres. A ground-source heat pump extracts this heat and raises its temperature to a level suitable for radiators, underfloor heating and hot water.
Deep geothermal heating accesses hotter water or rock much further underground. Depending on local geology and depth, the heat may be suitable for direct use in a building or a district heating network, sometimes with additional heat-pump equipment. The resource is highly location-dependent: the deeper the drilling, the greater the potential temperature, but also the cost and geological uncertainty.
There are also two common ways to collect shallow ground heat. Closed-loop systems circulate a fluid through sealed pipes buried in trenches or vertical boreholes. Open-loop systems pump groundwater through a heat exchanger and return it to the ground. Open-loop installations can deliver substantial heat, but need suitable aquifers, careful water management and the necessary environmental permissions.
How a ground-source heat pump heats a building
A heat pump does not create heat by burning fuel. It uses electricity to move thermal energy from one place to another. Fluid circulating through buried pipes absorbs heat from the ground. A heat exchanger and compressor then raise the temperature, allowing the system to warm water for the building’s heating circuit and hot-water cylinder.
Because the ground changes temperature more slowly than the air, it can provide a more consistent heat source through winter. This can help a ground-source system operate efficiently when outdoor temperatures fall. Many systems can also be reversed to provide cooling in warmer weather, although the design must account for the building and the local ground conditions.
Performance is often described by a coefficient of performance (COP): the amount of heat delivered for each unit of electricity consumed at a particular moment. A COP of 4, for example, means four units of heat are delivered for every unit of electricity used. Actual seasonal performance varies with ground temperature, system design, flow temperature, controls, installation quality and how the building is used. A headline COP should never be treated as a guarantee of annual bills.
Why the technology is attracting attention
Heating buildings is a major energy challenge. Gas and oil boilers provide dependable heat, but they release greenhouse gases at the point of use and expose households and businesses to fuel-price volatility. Electrified heating can reduce emissions as electricity generation becomes cleaner. Ground-source systems offer an additional advantage: they draw on a local heat resource that is available day and night and is not dependent on sunshine or wind at the moment heat is needed.
A 2025 review in Nature Reviews Earth & Environment found that ground-source heat pumps can use less electricity than air-source heat pumps in comparable settings, with reported reductions in electricity consumption and greenhouse-gas emissions. The precise advantage depends on the system and location; it is not a universal percentage that every property will achieve. The review also highlights the potential of seasonal underground heat storage, while noting that adoption has been held back by upfront costs and limited public familiarity.
For buildings with high, steady heat demand — such as hospitals, universities, leisure centres, apartment developments and public estates — a shared ground system can be particularly attractive. One network of boreholes or groundwater wells can serve several buildings, spreading the cost of drilling and equipment across a larger heat demand.
The UK opportunity: more than hot springs
The UK is not Iceland. It does not have widespread shallow volcanic heat or the same easy access to very hot underground water found in some geologically active countries. That does not mean geothermal heating is unsuitable. The British Geological Survey says shallow ground-source heating and cooling is technically feasible across much of the UK, although the best system depends on local geology, groundwater, available land and the building’s heat demand.
Deep geothermal is more restricted. The UK’s average geothermal temperature gradient is relatively modest, so commercially useful heat can require substantial drilling. The Department for Energy Security and Net Zero’s 2025 review updates the costs and technical assumptions for deep geothermal power and for deep and shallow geothermal heat. The economics remain project-specific, and drilling risk is a significant consideration.
In March 2026, the government told Parliament that deep geothermal heat for homes and buildings requires a heat network, and that there was limited evidence it could be delivered affordably across the UK. It said developers could choose deep geothermal where it can be demonstrated to provide affordable low-carbon heat, while the government monitors emerging projects. This is an important reality check: deep geothermal is promising, but it is not yet a proven mass-market replacement for household boilers.
The government’s Warm Homes Plan sets out a larger role for heat networks, aiming for them to meet at least 7% of heat demand in England by 2035. Such networks can use a mix of sources, including geothermal heat, large heat pumps, rivers, industrial waste heat and other local resources. In dense areas, a network can make more sense than asking every flat or building to install its own ground loop.
Where could geothermal make the most sense?
New housing developments offer an opportunity to plan boreholes, pipework and plant rooms before construction begins. Ground loops can sometimes be installed beneath buildings, car parks or landscaped areas, reducing the need to find space later. Designing for low-temperature heating from the outset can also improve efficiency.
Existing detached homes can be suitable where there is enough garden space for horizontal pipe loops, or where a vertical borehole can be drilled. However, drilling access, ground conditions, the condition of the heating system and the cost of upgrading radiators all matter. A property-by-property assessment is essential.
Flats and dense urban neighbourhoods may benefit more from communal or district systems. Individual residents often lack the land, access or control needed for their own boreholes. A shared network can serve multiple properties, but requires careful planning, long-term investment and strong consumer protections.
Large public and commercial buildings are potentially strong candidates because they often have predictable heat demand and space for plant equipment. Schools, hospitals, offices, leisure centres and university campuses can provide the scale needed to justify a shared installation. Some sites may also have access to flooded former mines, aquifers or other local heat resources.
The advantages — and the catch
Ground-source heating has several potential advantages. The ground provides a relatively stable heat source; systems can be highly efficient; there is no combustion in the building; and well-designed installations can last for many years. They can reduce exposure to fossil-fuel prices and, in suitable designs, provide cooling as well as heating. Shared schemes can make use of heat resources that would be impractical for an individual household to access.
But the biggest obstacle is often the initial bill. Ground loops and boreholes require excavation or specialist drilling, surveys, design work and installation. That can make a ground-source system more expensive to install than an air-source heat pump, even if it later has lower running costs in some circumstances. Whether the investment pays back depends on the building, the price of electricity, the system’s seasonal efficiency, maintenance and how much heat is used.
Ground-source heat pumps also need electricity. They are not a source of free energy, and their climate benefit depends partly on the carbon intensity of the electricity supply. Their performance can be undermined by poor design, undersized ground loops, badly balanced controls or a building that needs very high water temperatures. Insulation, draught-proofing and suitable heat emitters can therefore be just as important as the heat source itself.
Open-loop systems require particular care because groundwater is a shared environmental resource. Abstraction, reinjection, water chemistry and temperature changes must be managed to avoid harming aquifers or connected ecosystems. Drilling can also disturb land and create noise during construction. Deep geothermal projects add further uncertainties: the heat resource may not be as productive as expected, and exploratory wells can be expensive even if a project does not proceed.
There are also wider questions about who pays and who benefits. A household may not control a communal heat network, its tariffs or its maintenance decisions. Regulation, transparent billing, reliable operators and clear consumer rights are essential if district heating is to earn public trust. A technically low-carbon system is not automatically a fair or affordable one.
Could it outperform air-source heat pumps?
Not in every situation. Air-source heat pumps are generally simpler to install because they do not need buried ground loops or deep boreholes. They are likely to remain the more practical option for many individual homes, particularly where outdoor space is limited or the cost of drilling cannot be justified.
Ground-source systems can have an edge where the ground is suitable, a building has substantial and steady heat demand, and the installation can be designed efficiently. Their more stable heat source can be valuable during cold weather and can reduce the impact of outdoor temperature swings. In other locations, the extra installation cost may outweigh the efficiency gain.
The sensible comparison is therefore not “geothermal versus heat pumps”. A ground-source heat pump is itself a type of heat pump. The real choice is which heat source and system design best suits a particular building or neighbourhood: air, shallow ground, groundwater, mine water, deep geothermal or a combination of sources.
What needs to happen next?
For geothermal heating to grow, the UK needs better mapping of underground resources, clearer local planning, skilled drilling and installation teams, and finance that recognises the long life of the infrastructure. New developments should consider ground loops and heat networks early rather than treating them as expensive additions after the design is fixed.
Public bodies can help by testing systems across different building types and publishing real-world performance and cost data. For deep geothermal, sharing exploration risk may be important: developers are less likely to invest where a costly well could fail to find a usable resource. For communal schemes, consumer safeguards must develop alongside the technology, not years after residents have signed up.
Verdict: a sensible part of the future, not a universal answer
Geothermal energy could become a valuable part of how homes and buildings are heated, but its future is likely to be practical rather than spectacular. Shallow ground-source heat pumps are already a workable option in many locations and could be deployed much more widely. Shared ground systems and mine-water schemes may help heat larger developments and urban districts. Deep geothermal could provide dependable low-carbon heat to selected networks, but geology, drilling costs and project risk limit where it can be used economically.
The strongest case is for treating geothermal as one element of a broader heating strategy: alongside better-insulated buildings, efficient heat pumps, low-carbon electricity and well-regulated heat networks. It will not replace every gas boiler overnight, and it will not make sense for every property. But where the ground, building and economics line up, drawing heat from beneath our feet could prove to be a durable and sensible investment.
Sources and further reading
- British Geological Survey — Geothermal technologies
- Department for Energy Security and Net Zero — UK geothermal energy review and cost estimations (2025)
- UK Parliament — Government answer on deep geothermal heat networks (25 March 2026)
- UK Government — Warm Homes Plan: heat networks
- Welsh Government — Demystifying heat from the ground (2026)
- Nature Reviews Earth & Environment — Opportunities, benefits and impacts of shallow geothermal energy (2025)
- Institution of Civil Engineers — What is geothermal energy and how does it work? (2026)
