
Solar panels have become a familiar sight on rooftops, farms and commercial buildings. Most conventional panels use silicon, a material that has powered the photovoltaic industry for decades. Silicon technology has improved steadily, but its efficiency is constrained by fundamental physical limits. Researchers are now developing tandem solar cells that combine silicon with a second light-absorbing material called perovskite.
- What is a perovskite solar cell?
- Why combine perovskite with silicon?
- What happened in 2026?
- The durability problem
- Can perovskites be manufactured at scale?
- What could this mean for solar power?
- Environmental questions
- When might consumers see them?
- A serious challenger to conventional silicon
- Sources and further reading
The aim is straightforward: capture more of the energy in sunlight without simply making a panel larger. In 2026, research teams reported important progress in both the efficiency and manufacturability of perovskite-silicon tandem devices. Some laboratory cells have reached efficiencies above 30 per cent, and researchers are beginning to demonstrate larger devices that retain much of that performance.
What is a perovskite solar cell?
Perovskite is the name given to a family of materials that share a particular crystal structure. Certain metal-halide perovskites have optical and electronic properties that make them attractive for solar cells. Their composition can be adjusted to absorb different parts of the solar spectrum, and thin films can be produced using techniques such as solution coating or thermal evaporation.
One reason perovskites have attracted so much attention is the speed at which their photovoltaic performance has improved in research laboratories. They can absorb sunlight strongly in very thin layers, and their bandgap can be tuned by changing the material’s chemical composition. But high efficiency is only part of the challenge. Solar cells must also survive heat, moisture, ultraviolet light and decades of outdoor exposure.
Why combine perovskite with silicon?
A conventional silicon solar cell converts a portion of the sunlight that reaches it into electricity. Some higher-energy photons lose excess energy as heat, while lower-energy photons may pass through without being absorbed efficiently. A tandem device stacks two solar absorbers with different bandgaps so that each layer can make better use of a different part of the spectrum.
In a common perovskite-silicon arrangement, the perovskite top cell absorbs higher-energy visible light, while the silicon bottom cell captures longer-wavelength light that passes through. Together, the two junctions can convert more of the incoming solar energy into electricity than a single silicon junction operating alone.
The layers must be carefully matched. Their electrical connections, optical transparency, surface textures and manufacturing processes all affect performance. A tandem cell is not simply two finished panels placed on top of each other; it is an integrated device in which the layers must work together.
What happened in 2026?
In August 2026, a Nature Sustainability study reported perovskite solar cells fabricated in ambient air using a scalable blade-coating process. The researchers reported a certified efficiency of 26.5 per cent for a single-junction cell and 23.2 per cent for modules. The devices retained 99.8 per cent of their initial efficiency after 1,200 hours of continuous light soaking in the reported test.
The same research demonstrated monolithic perovskite-silicon tandem cells with a certified efficiency of 33 per cent. This is significant because it combines a high-performing device with a manufacturing approach intended to be more compatible with large-scale production. The results do not yet establish a 33 per cent commercial rooftop panel; the efficiency figure relates to a certified research cell.
Another Nature paper published in August 2026 described thermally evaporated perovskite-silicon tandem cells. The researchers used a formamidinium-based eutectic to lower the effective evaporation temperature of a key ingredient, helping avoid thermal degradation during processing. They reported a steady-state efficiency of 31.5 per cent for a one-square-centimetre device and 30 per cent for a 200-square-centimetre device. The larger cell retained 95 per cent of its initial efficiency after 2,000 hours of damp-heat ageing at 85 degrees Celsius and 85 per cent relative humidity, and showed negligible power loss after two months of outdoor operation.
These are encouraging engineering results, particularly the move from tiny research cells to larger areas. However, accelerated ageing tests and a short period outdoors cannot establish a 25- or 30-year service life. Long-term field data will be essential before the technology can be judged against mature silicon panels.
The durability problem
Many perovskite materials are sensitive to moisture, oxygen, heat and ultraviolet exposure. Their performance can degrade as the crystal structure changes or chemical components migrate. Interfaces between layers can also deteriorate, and some high-performance formulations contain lead, creating additional concerns about manufacturing, breakage, recycling and environmental release.
Researchers are developing improved compositions, protective coatings, encapsulation systems and more stable interfaces. The 2026 studies demonstrate progress in both material stability and manufacturing methods, but durability remains one of the most important barriers to widespread deployment.
Encapsulation is especially important. Commercial solar modules must prevent water and oxygen from reaching sensitive layers while also withstanding mechanical stress, temperature cycling and decades of outdoor weather. A protective package must not add so much cost or optical loss that it undermines the efficiency advantage.
Can perovskites be manufactured at scale?
Laboratory cells are often made on small substrates under carefully controlled conditions. Industrial production requires uniform coatings across large areas, high manufacturing yields and processes that can run reliably at speed. A small defect that has little effect on a tiny test cell can become a serious problem when repeated across a full-size module.
Blade coating and thermal evaporation are two approaches being investigated. Blade coating can spread a liquid ink across a surface and may be adapted to continuous manufacturing. Thermal evaporation deposits materials from vapour under controlled conditions and is already familiar in parts of the electronics industry. Each route has advantages and challenges involving equipment, material use, uniformity and cost.
One of the most encouraging aspects of the 2026 results is that researchers are addressing manufacturing constraints directly rather than reporting efficiency alone. Large-area performance, stable processing and reproducible production are essential if tandem cells are to become commercially meaningful.
What could this mean for solar power?
If tandem modules can be produced at scale with long lifetimes, they could generate more electricity from the same roof or land area. That could be particularly valuable where space is limited, such as commercial rooftops, industrial sites and some urban installations. Higher efficiency could also reduce the number of modules, mounting structures and electrical connections needed for a given output.
But efficiency is not the only measure of value. The cost per kilowatt-hour over the module’s lifetime depends on manufacturing cost, degradation, warranty, installation, maintenance and recycling. A slightly less efficient silicon panel with a proven service life may remain more attractive than a higher-efficiency tandem module whose durability or warranty is uncertain.
Environmental questions
Perovskite solar technology could help produce more renewable electricity from limited space, but its environmental profile must be assessed across the full life cycle. Some leading perovskite formulations contain lead. Researchers and manufacturers need reliable encapsulation, safe production methods, end-of-life collection and effective recycling or recovery systems.
The environmental impact of the materials and manufacturing process should be compared with the emissions avoided by generating electricity over the module’s lifetime. The longer a module operates efficiently, the more energy and emissions savings it can deliver. A high laboratory efficiency is not enough if a product degrades quickly or is difficult to recycle.
When might consumers see them?
Perovskite-silicon tandems are moving towards commercialisation, but research records should not be confused with widely available products. Manufacturers must demonstrate consistent quality, long-term reliability, bankable warranties and competitive costs. Independent certification and field testing will be crucial to building confidence among installers, insurers and customers.
Early applications may focus on specialist or premium markets where additional output per square metre justifies a higher price. Wider adoption will depend on whether manufacturers can scale production and deliver a durable module at a competitive cost.
A serious challenger to conventional silicon
Perovskite tandem solar cells are among the most promising developments in photovoltaic research. The 2026 results show that efficiency above 30 per cent is possible in larger research devices and that more scalable manufacturing methods are being developed. That is a substantial step beyond simply demonstrating another small laboratory record.
The next test is time. Solar panels are expected to work outdoors for decades, not just through a short laboratory trial. If perovskite tandems can prove that they are stable, affordable, safe and recyclable, they could reshape the economics of solar power. Until then, they remain a technology with extraordinary potential and important questions still to answer.
Sources and further reading
- Nature Sustainability: Scalable ambient fabrication of single-junction and perovskite–silicon tandem solar cells (13 August 2026)
- Nature: Thermally evaporated perovskite/silicon tandems via formamidinium eutectic (5 August 2026)
- US Department of Energy: Perovskite Solar Cells
- National Renewable Energy Laboratory: Best Research-Cell Efficiency Chart
- National Renewable Energy Laboratory: Photovoltaic research
